The Power-Stud+ SD4 and Power-Stud+ SD6 anchors are fully threaded, torque-controlled, stainless steel wedge expansion anchors which are designed for consistent performance in cracked and un cracked concrete. Suitable base materials include normal-weight, lightweight concrete, and grouted concrete masonry (CMU). The anchor is manufactured with a stainless steel body and expansion clip. Nuts and washers are included.

Features

• Knurled mandrel design provides consistent performance in cracked concrete and helps prevent galling during service life.
• Nominal drill bit size is the same as the anchor diameter
• Anchor can be installed through standard clearance fixture holes
• Length ID code and identifying marking stamped on head of each anchor
• Anchor design allows for follow-up expansion after setting under tensile loading
• Made in USA versions (MIUSA) available on request; see ordering information on page 12
• MIUSA anchors can meet domestic content requirements (e.g. BAA, TAA, AIS) at time of publication; product certifications available by request

Applications

• Structural connections, i.e., beam and column anchorage
• Tension zone applications, i.e., safety-related attachments
• Equipment anchorage, angles, brackets and ledgers
• Utility supports and bracing attachments
• Barriers, guards and fencing
• Mezzanines, racking and railing
• Seismic and wind loading (SDC A - F)
• Facades, clips and mounts

Specifications

• Type: Wedge Expansion Anchors
• Anchor Size: 5/8" X 6"
• Thread Length: 4"
• Quantity: 25
• Approvals & Listings: (ICC-ES), ESR-2502, Code compliant with the 2021 IBC/IRC, 2018 IBC/IRC, 2015 IBC/IRC, and 2012 IBC/IRC, Tested in accordance with ACI 355.2/ASTM E488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318 (-19 or -14) Chapter 17 or ACI 318 Appendix D, Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and un cracked concrete including seismic and wind loading (Category 1 anchors), City of Los Angeles, LABC and LARC Supplement (within ESR-2502), Florida Building Code, FBC Supplement including HVHZ (within ESR-2502)
• Suitable Base Materials: Normal-weight concrete, Lightweight concrete, Grouted concrete masonry (CMU)

Downloads